Pelago Rasket

  • Extends cargo capability of a bicycle
  • Fits every Pelago and most other makes*
  • Holds cargo e.g. a bag in the basket
  • Carries pannier bags on side rails
€99.00

* Required Fields

€99.00

Take the weight off your shoulders and put it in the Rasket – a solid fusion of a basket and a rack. The design of the product allows for various ways of attachment using bungee cords and straps.


The Rasket is ideal for carrying backpacks and bags, providing support with side walls. The side rails on the stays can hold a pair of panniers for extra cargo.


Made of stainless steel, the Rasket has a sturdy rigid construction and doesn't sway from side to side. The fork mount allows adjusting the handlebar to whatever height.

 

The platform can hold up to 5 kg and the sides up to 5kg each. Recommended maximum load for Rasket is 15 kg in total.

 

*The platform is attached to the front brake hole in the fork's crown and the stays are attached to rack eyelets, fender eyelets or a hub's axle. To install a rack onto a hub's axle, the axle should have appropriate geometry and enough thread to fit the rack's dropout between the fork dropout and the axle nut.

 

The product includes a mount for a light, but it does not include a light.

 

You can find the assembly instruction for the Rasket here

Length 300 mm
Width 360 mm
Height 150 mm
Material Stainless steel

Take the weight off your shoulders and put it in the Rasket – a solid fusion of a basket and a rack. The design of the product allows for various ways of attachment using bungee cords and straps.


The Rasket is ideal for carrying backpacks and bags, providing support with side walls. The side rails on the stays can hold a pair of panniers for extra cargo.


Made of stainless steel, the Rasket has a sturdy rigid construction and doesn't sway from side to side. The fork mount allows adjusting the handlebar to whatever height.

 

The platform can hold up to 5 kg and the sides up to 5kg each. Recommended maximum load for Rasket is 15 kg in total.

 

*The platform is attached to the front brake hole in the fork's crown and the stays are attached to rack eyelets, fender eyelets or a hub's axle. To install a rack onto a hub's axle, the axle should have appropriate geometry and enough thread to fit the rack's dropout between the fork dropout and the axle nut.

 

The product includes a mount for a light, but it does not include a light.

 

You can find the assembly instruction for the Rasket here

Length 300 mm
Width 360 mm
Height 150 mm
Material Stainless steel