Pelago Key Comp Fixed/SS Hubs

Double click on above image to view full picture

Zoom Out
Zoom In

Pelago Key Comp Fixed/SS Hubs

€79.00

Low-flange hubs for single-speed and fixed gear wheelsets. Hole count is 36. Finish is shiny aluminum. These hubs are the standard hubs for Capri and San Sebastian.

 

The hubs have steel axles and nuts. Rear hub is flip-flop: on the other side there's threading for a fixed cog and a lockring, and on the other side you can attach a single-speed freewheel. Rear spacing is 120mm. The hubs use standard sealed bearings.

Spoke holes 36
Rear width 120 mm
Rear hub threading Fixed / freewheel
Axle type Steel

Low-flange hubs for single-speed and fixed gear wheelsets. Hole count is 36. Finish is shiny aluminum. These hubs are the standard hubs for Capri and San Sebastian.

 

The hubs have steel axles and nuts. Rear hub is flip-flop: on the other side there's threading for a fixed cog and a lockring, and on the other side you can attach a single-speed freewheel. Rear spacing is 120mm. The hubs use standard sealed bearings.

Spoke holes 36
Rear width 120 mm
Rear hub threading Fixed / freewheel
Axle type Steel